Pg. 19
8.5 COPY SET
1
First, select Set from the Program
menu.
4
Place the original sensor above the tool’s antenna and select Copy. You can
also copy the sensor ID from the original sensor if it is still installed in the
wheel.
Create Set allows you to program new IDs to 4 blank aftermarket sensors all on the same screen.
2
3
Then, select Copy Set.
The tool will display a chart with 4
wheels and a copy button for each.
The copied sensor ID will be
displayed. The TO BE COPIED
column will now allow you to
program a new sensor for that
wheel.
5
OR
