Pg. 22
8.7 RETRIEVE ID
1
First, select Retrieve ID from the
Program menu.
3
After a few moments, the tool will
display a chart of the current sensor
IDs stored in each wheel
Retrieve ID allows you to retrieve the sensor IDs that are currently stored in the vehicle’s ECU and program them to
blank aftermarket sensors.
2
Then, connect the OBDII Quick Connect Cable into the tool and then into
the vehicle. Once connected, select Retrieve IDs.
4
Place the first sensor above the
tool’s antenna and press the Program
button.
5
After a few moments, the sensor will be
successfully programmed and will now
have the same ID as the stored ID.
a
B
6
Repeat step 5 for the remaining 3
sensors.
