Pg. 21
8.6 MANUAL ID
1
First, select Manual ID from the
Program menu.
Manual ID allows you to manually enter a sensor ID and program it to a blank aftermarket sensor.
IDs can be entered in either Decimal (0-9) or Hexadecimal (A-F 0-9) formats.
2
3
Then, select either Decimal or
Hexadecimal.
Select the ID entry area to begin
entering a sensor ID.
4
Use the on-screen keyboard to
enter a sensor ID. When finished,
select the down arrow icon at the
bottom of the screen to minimize the
keyboard.
5
6
Place the sensor above the tool’s
antenna and press the Program
button.
The sensor will be successfully
programmed and the entered ID will
be displayed.
