Pg. 13
7.2 OBDII RELEARN
1
2
3
Begin by triggering the LF sensor on
the vehicle.
Continue by triggering the RF, RR,
and LR sensors. *For Honda/Acura:
LR, RR, and RF.
Select the Reset TPMS menu and
select the OBDII drop-down menu.
4
Select Begin Procedure. *Note: If all
sensors have not been triggered you
will be taken back to the main vehicle
screen to finish triggering.
5
Connect the OBDII Quick Connect
Cable to the top of the tool, then
into the vehicle and select Relearn.
OBDII Relearns require use of the OBDII Quick Connect Cable and are performed by triggering each sensor, then
connecting the cable to the tool/vehicle to complete the procedure. *Note: Not all vehicle’s have OBDII procedures
and some procedures are different. Refer to the tool’s built-in instructions for each specific procedure.
6
After a few moments, all of the
sensors will have been successfully
relearned to the vehicle.
a
B
