Chapter 1. Introduction
5
Components
PE4104G Front View
No.
Component
Description
1
LAN Port
The Cat 5e cable that connects the unit to the Internet
plugs in here.
2
Reset Button
(recessed)
Press and release to reboot the unit. This Reset Button
is recessed and must be pushed with a thin object, such
as the end of a paper clip, or a ballpoint pen.
3
Sensor Port & LED
The external sensor plug into this RJ-11 port, and the
sensor LED lights orange when a sensor is connected to
the sensor port.
4
Door Sensor Dry-
Contact Port
The external door sensor plug into this Door Sensor Dry-
Contact port.
5
Power Control Buttons
& LED
Each Power Control Button (1 to 4), controls the power
status of its corresponding AC output port as follow:
Pressing and holding the button in for more than 3
seconds switches the power to its corresponding
port on of off.
The LEDs light green to indicate that there is electricity
going to its corresponding outlet.
6
Device Power LED
The Device Power LED lights orange to indicate the unit
is powered up and ready to operate.
1 2
5
4
3
6
