Chapter 4. Browser Operation
35
Note:
If you are sending the report to more than one email address,
separate the addresses with a semicolon. The total cannot exceed
256 characters.
SNMP Trap Receivers
Up to four SNMP management stations can be specified. If you want to use
SNMP trap notifications, do the following:
1. Check
Enable SNMP Trap
.
2. Select which version of SNMP you want to use.
3. Key in the IP address(es) and the service port number(s) of the
computer(s) to be notified of SNMP trap events. The valid port range is
1–65535. The default port number is 162.
