ATEN OL1000LV, User Manual

Page: 30 / 68

UPS User Manual
20
Installation
Refer to the diagram following the steps below to connect the UPS:
Note: OL1000LV is the example used here.
1. Connect the unit’s grounding terminal to a suitable grounded object.
2. Connect electrical appliances to the non-critical power outlets.
3. Connect electrical appliances (that you do not wish to have power cut off)
to the critical power outlets.
4. (Optional) Connect external battery to the External Battery Connection
Port. Refer to External Battery Connection on page 22.
5. (Optional) Connect a modem/phone/fax source (using a corresponding
cable) into the surge-protected “IN” outlet. Connect an equipment (you
wish to have surge protection for) to the “OUT” outlet using another
modem/fax/phone cable.
6. (Optional) Connect the USB Type B end of the included USB Type A to B
cable to the unit and the Type A end to a USB port on your PC.
7. (Optional) Connect the included RS-232 cable between the RS-232 port of
the unit and a communication port of your PC.
8. (Optional) Connect either SNMP or AS400 card for advanced
communication and monitoring options.
9. Connect this power cable to an AC power socket.