ATEN OL1000LV, User Manual, Page: 19 / 68

9
Chapter 2
Hardware Setup
Mounting
The unit can be either desktop mounted (vertically or horizontally) or rack
mounted (in a 19” rack chassis).
Rack Mount
A rail slide kit and rack mount kit is provided in the package for rack mount.
The rail slide kit is installed on the rack and the rack mount kit installs the UPS
to the rack. To mount the UPS, do the following:
1. Make sure the rail slide kit includes all the components. The components
include 2 slide rails (1 for each side, indicated by L and R in the diagram
below), 6 M6 nuts, 4 fixing studs and 8 M6 screws, as shown in the
diagram below:
1. I mportant safety information regarding the placement of this
device is provided on Safety Instructions on page 47 . Please
review it before proceeding.
2. Make sure that power to all the devices you will be installing has
been turned off. You must unplug the power cords of any
computers that have the Keyboard Power On
function.