ATEN OL1000LV, User Manual

Page: 13 / 68

Chapter 1. Introduction
3
Features
 True double-conversion — Output power factor is 1, which means all of
the power supplied is being used for productive work and makes work the
most efficient

Output voltage regulation < 1% — Provides higher performance and
efficiency for critical applications
 Programmable power management outlets — Users can easily and
independently control load segments. During power failure, this feature
enables users to extend battery time to mission-critical devices by shutting
down the noncritical devices

Emergency power off function (EPO) — EPO connector at rear panel
allows emergency UPS Power Off from a remote location

SNMP + USB + RS-232 multiple communications — Allows either USB
or RS-232 communication port to work with SNMP interface
simultaneously
 Hot swappable battery design — All potential UPS maintenance,
including complete power module exchange, can be performed without
powering down connected equipment. As long as utility power is on, you
may leave the UPS and connected equipment on while replacing a new
battery

ECO mode for energy saving — Offers up to 97% efficiency to cut energy
usage and cost. UPS power application via static bypass, timely returning
to online double conversion when the need arises

Provides over voltage cut-off protection and surge immunity by MOV for
full time equipment protection
 High power factor charger up to 1000 W capacity with very low ripple
current when charging battery

Multi-functional LCD interface — Displays immediate, detailed
information, including the input voltage, battery capacity, power status,
battery status, operating status, assessed backup runtime, and etc.

Smart battery charger design to optimize battery performance — Adjusts
the charging voltage according to outside temperature and effectively
extends the batteries’ life spans.