ATEN OL1000LV, User Manual, Page: 20 / 68

UPS User Manual
10
2. Insert the 4 fixing studs: Two screw holes are available on both ends of a
slide rail. Screw a fixing stud into the top screw hole as shown:
3. Have the rail near the supporting columns, pull the two ends of the rail
slider apart. While at it, fit the fixing studs into the columns’ holes on the
same level. This step serves to hold the slider rail in place for the latter
steps.
4. Screw a M6 screw into each of the bottom holes to fix the rail slider in
place for both ends of the rail, and for both rail sliders (a total of 4 M6
screws are used here).