ATEN OL1000LV, User Manual

Page: 25 / 68

Chapter 2. Hardware Setup
15
2 Stand Extenders are used to extend one tower stand. The Stand Extenders (4
pcs) are from the package content of the battery box.
Follow the instructions below to assemble the extended tower stands.
1. Remove the screws from the bottom of the tower stand.
2. Bend the tower stand as shown in the diagram below:
The separated tower stand pieces and two stand extenders (from the
package content of the battery box) are shown below:
3. Orient the stand extenders as shown in the diagram below. Level and
connect the extenders to the bottom of the tower stand pieces as indicated
by the arrow. Make sure the hooks are properly hooked into the tower
stand pieces.