Asus TS700-E9 Series User Manual Download Page 95

Page: 95 / 178

5-3

ASUS TS700-E9 Series

Press <Tab> to switch to the

Drive

field.

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS

then press <Enter>.

Press <Tab> to switch to the

Folder Info

field.

Press the Up/Down arrow keys to find the BIOS file then press <Enter>.

Reboot the system when the update process is done.

5.1.2

ASUS EzFlash Utility

The ASUS EzFlash Utility feature allows you to update the BIOS using a USB flash disk

without having to use a DOS-based utility.

The succeeding BIOS screens are for reference only. The actual BIOS screen displays

may not be the same as shown.

To update the BIOS using EzFlash Utility:

Insert the USB flash disk that contains the latest BIOS file to the USB port.

Enter the BIOS setup program. Go to the

Tool

menu to select

Start EzFlash

and press

<Enter> to enable it.

Download the latest BIOS from the ASUS website at www.asus.com before using this

utility.

ASUS Tek. EzFlash Utility

[Up/Down/Left/Right]:Switch [Enter]:Choose [q]:Exit

FS0

System Volume Information

<DIR>

Windows

<DIR>

WS-C621E-SAGE-ASUS-0204

<DIR>

Current Platform

Platform : WS C621E SAGE

Version : 0201

Build Date :05/05/2017

New Platform

Version : 0204

Build Date :05/24/2017

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands

Asus TS700-E9 Series, User Manual

Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands