Asus TS700-E9 Series User Manual Download Page 164

Page: 164 / 178

7-16

Chapter 7: Driver Installation

5. Click

Install Drivers and Software

option to begin installation.

7.5

Installing the Intel

I210 Gigabit Adapters driver

This section provides the instructions on how to install the

Intel

I210 Gigabits Adapter

Driver

on the system.

To install the

Intel

I210 Gigabi

Adapters Driver

on the Windows

operating system:

Restart the computer.

2. Log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

Setup.exe

. Double-click the

Setup.exe

to run the support DVD.

4. Click

Intel

I350-AM2/I210 Gigabit Adapters Driver

in the

Drivers

menu of the main

screen to start the installation.

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Asus TS700-E9 Series, User Manual, Page: 164 / 178

Search results

Summary of Contents for TS700-E9 Series

Reviews: