Asus TS700-E9 Series User Manual Download Page 135

Page: 135 / 178

6-23

ASUS TS700-E9 Series

6.4.4

Exiting the ASMedia 106x RAID Manager

To exit the RAID Manager:

From the RAID Manager menu, press <Esc>.

Press <Y> to exit or press <N> to return to the RAID Manager main menu.

Leave RAID Manager? (y/n)_

Asmedia 106x RAID Manager v1.07

Remove RAID disks with attached HDD

Enter : Confirm the selection

Esc : Exit

: Move to Up/Down item

>> Remove RAID

>> Create RAID 0

>> Create RAID 1

Current Mode:

RAID 1

No.

Model Name

ST3160812AS

Status:

Good

RAID Size:

160.02 GB

Size

Role

160.04 GB

RAID 1 Primary

160.04 GB

RAID 1 Mirror

Mode Change is completed.

Once the RAID set has been created, the Current Mode, Status, RAID Size, and HDD

roles should display the RAID information.

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands

Asus TS700-E9 Series, User Manual

Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands