Asus TS700-E9 Series User Manual Download Page 151

Page: 151 / 178

ASUS TS700-E9 Series

7-3

3. Click

Load Driver

A message appears reminding you to insert the installation media containing the driver of

the RAID controller driver (the installation media can be a CD, DVD, or USB flash drive).

•

If you have only one optical drive installed in your system, eject the Windows OS

installation disc and replace with the motherboard Support DVD into the optical

drive.

•

Or y

ou may connect a USB flash drive containing the RAID controller driver.

Click

Browse

to continue.

Locate the driver in the corresponding folder of the Support DVD or USB flash drive

and then click

to continue.

Select the RAID controller driver you need from the list and click

Next

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands

Asus TS700-E9 Series, User Manual

Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands