Asus TS700-E9 Series User Manual Download Page 136

Page: 136 / 178

6-24

Chapter 6: RAID Configuration

6.5

ASMedia 106x RAID Manager (Windows)

The ASMedia 106x RAID Manager allows you to create RAID 0, and RAID 1 set(s) from

Serial ATA hard disk drives that are connected to the Serial ATA connectors supported by the

Southbridge.

To enter the ASMedia

106x RAID Manager under Windows operating system:

You do not need to manually install the ASMedia 106x RAID Manager on a Windows

operating system.

Insert the motherboard/system support DVD into the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

Setup.exe

. Double-click the

Setup.exe

to run the support DVD.

Click on the

Utilities

tab, then click on

Asmedia 106x RAID Manager

to launch the

RAID Manager.

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands

Asus TS700-E9 Series, User Manual

Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands