Asus TS700-E9 Series User Manual Download Page 140

Page: 140 / 178

6-28

Chapter 6: RAID Configuration

6.5.3

Changing the RAID level

Take caution when changing the RAID level. You will lose all data on the hard disk drives

when you change to a different RAID level.

To change the RAID level:

Select

Mode Change

from the left menu.

(optional) Enter a name for the RAID set, then select the disks or additional disks to include

in the new RAID set.

Select your new RAID level

from the check box to the right.

Selecting

Normal

will delete the RAID set.

Click on

EXECUTE

to start the RAID process.

The following message will appear, press

to delete the RAID set, or press

Cancel

to return to the RAID Manager menul.

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands

Asus TS700-E9 Series, User Manual

Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands