Asus TS700-E9 Series User Manual Download Page 159

Page: 159 / 178

ASUS TS700-E9 Series

7-11

7.2

Management applications and utilities installation

When you place the support DVD into the optical drive, the DVD automatically displays the

main screen if Autorun is enabled in your computer. By default, the Drivers tab is displayed.

1. The contents of the support DVD are subject to change at any time without notice.

Visit the ASUS website (www.asus.com) for the latest updates on software and

utilities.

2. The support DVD is supported on Windows

Server 2012 R2 and Windows

Server

2016.

The support DVD that is bundled with your motherboard contains drivers, management

applications, and utilities that you can install to maximize the features of your motherboard.

The main screen of the Support DVD contains the following tabs:

1. Drivers

2. Utilities

3. Manual

4. Contact

The main screen of the Support DVD looks exactly the same on the Windows

Server 2012

R2 and on the Windows

Server 2016 Operating System (OS).

7.3

Running the Support DVD

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

Setup.exe

. Double-click the

Setup.exe

to run the support DVD.

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Asus TS700-E9 Series, User Manual, Page: 159 / 178

Search results

Summary of Contents for TS700-E9 Series

Reviews: