Asus TS700-E9 Series User Manual Download Page 162

Page: 162 / 178

7-14

Chapter 7: Driver Installation

7.4 Intel

chipset device software installation

This section provides the instructions on how to install the Intel

chipset device software on

the system.
You need to manually install the Intel

chipset device software on a Windows operating

system.
To install the Intel

chipset device software:

Restart the computer, and then log on with

Administrator

privileges.

Insert the motherboard/system support DVD into the optical drive. The support DVD

automatically displays the

Drivers

menu if Autorun is enabled in your computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

Setup.exe

. Double-click the

Setup.exe

to run the support DVD.

Click the item

Intel

Chipset Device Software

from the menu.

4. The

Intel

Chipset Device Software

window appears. Click

Next

to start the

installation.

Summary of Contents for TS700-E9 Series



















































































































































































Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands

Asus TS700-E9 Series, User Manual

Search results

Summary of Contents for TS700-E9 Series

Reviews:

Related manuals for TS700-E9 Series

Brands by name

Popular brands