manualshive.com logo in svg

Asus TS700-E9 Series, User Manual, Page: 167 / 178

Share
Download
Asus TS700-E9 Series User Manual Download Page 167

ASUS TS700-E9 Series

7-19

7.6 

VGA driver installation

This section provides the instructions on how to install the ASPEED Video Graphics Adapter 

(VGA) driver.

You need to manually install the ASPEED VGA driver on a Windows

®

 operating system.

To install the ASPEED VGA driver:

1. 

Restart the computer, and then log on with 

Administrator

 privileges.

2. 

Insert the motherboard/system support DVD into the optical drive. The support DVD 

automatically displays the 

Drivers

 menu if Autorun is enabled in your computer. 

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to 

locate the file 

Setup.exe

. Double-click the 

Setup.exe

 to run the support DVD. 

3. 

Click the 

ASPEED AST2500 Display Driver

 to begin installation.

4. 

From the installation window, click 

Next

 to start the installation.

Summary of Contents for TS700-E9 Series



















































































































































































Reviews:

No comments