Asus TS300-E8-RS4-C User Manual Download Page 76

Page: 76 / 170

Chapter 4: Motherboard information

4-20

7. CPU, front, and rear fan connectors

(4-pin CPU_FAN1, FRNT_FAN1, FRNT_FAN2, FRNT_FAN3, REAR_FAN1)

The fan connectors support cooling fans. Connect the fan cables to the fan

connectors on the motherboard, ensuring that the black wire of each cable

matches the ground pin of the connector.

• DO NOT forget to connect the fan cables to the fan connectors. Insufficient

air flow inside the system may damage the motherboard components.

• These are not jumpers! DO NOT place jumper caps on the fan connectors!

• All fans feature the ASUS Smart Fan technology.

6. Thermal sensor cable connectors (3-pin TR1)

This connector is for temperature monitoring. Connect the thermal sensor

cable to this connector and place the other end to the device, which you want

to monitor temperature.

Summary of Contents for TS300-E8-RS4-C











































































































































































Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands

Asus TS300-E8-RS4-C, User Manual

Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands