Asus TS300-E8-RS4-C User Manual Download Page 131

Page: 131 / 170

6-11

ASUS TS300-E8-RS4-C

6.2.6

Setting the Boot array in the BIOS Setup Utility

You can set the boot priority sequence in the BIOS for your RAID arrays when creating multi-

RAID using the Intel

Rapid Storage Technology enterprise SATA Option ROM utililty.

To set the boot array in the BIOS:

Set at least one of the arrays bootable to boot from the hard disk.

Reboot the system and press <Del> to enter the BIOS setup utility during POST.

Go to the

Boot

menu and select the boot option priority.

Use up/down arrow keys to select the boot priority and press <Enter>. See the

Boot

menu

section of Chapter 4 for more details.

From the

Exit

menu, select

Save Changes & Exit

, then press <Enter>.

When the confirmation window appears, select

Yes

, then press <Enter>.

Summary of Contents for TS300-E8-RS4-C











































































































































































Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands

Asus TS300-E8-RS4-C, User Manual

Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands