Asus TS300-E8-RS4-C User Manual Download Page 80

Page: 80 / 170

Chapter 4: Motherboard information

4-24

13. ATX power connectors (24-pin EATXPWR1, 8-pin EATX12V1, 4-pin

PWR3)

These connectors are for the ATX power supply plugs. The power supply

plugs are designed to fit these connectors in only one orientation. Find the

proper orientation and push down firmly until the connectors completely fit.

• DO NOT forget to connect the 24-pin and the 8-pin power plugs; otherwise,

the system will not boot up.

• Use of a power supply unit (PSU) with a higher power output is

recommended when configuring a system with more power-consuming

devices. The system may become unstable or may not boot up if the power

is inadequate.

• This motherboard supports ATX2.0 PSU or later version.

• Ensure that your PSU can provide at least the minimum power required by

your system.

Summary of Contents for TS300-E8-RS4-C











































































































































































Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands

Asus TS300-E8-RS4-C, User Manual

Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands