manualshive.com logo in svg

Asus TS300-E8-RS4-C, User Manual, Page: 19 / 170

Share
Download
Asus TS300-E8-RS4-C User Manual Download Page 19

ASUS TS300-E8-RS4-C

1-7

1.6 

Internal features

The barebone server includes the basic components as shown.

The barebone server does not include a floppy disk drive and an optical disc drive. Connect 

a USB floppy disk drive or a USB ODD to any of the USB ports on the front or rear panel if 

you need to use a floppy disk or a optical disc.

*WARNING

HAZARDOUS MOVING PARTS

 

KEEP FINGERS AND OTHER BODY PARTS AWAY

Turn off the system power and detach the power supply before removing or replacing any 

system component.

1. 

550W 80PLUS Gold Redundant Power Supply unit

2. 

120mm x 38mm system fan (ARX FD1212-DP284G)

3. 

ASUS P9D-E/4L Server Board

4. 

Chassis intrusion switch

5. 

Expansion card locks

6. 

Optical drive 

7. 

4-bay HDD module (first set)

8. 

4-bay HDD module (second set, optional)

9. 

SATA/SAS backplane board (first set, hidden)

1

2

3

4

5

6

7

9

8

Summary of Contents for TS300-E8-RS4-C











































































































































































Reviews:

No comments