2-5
ASUS TS300-E8-RS4-C
Retention tab
Load lever
2. Press the load lever with your
thumb (A), then move it to the right
(B) until it is released from the
retention tab.
3. Lift the load lever until the load
plate is completely lifted.
Load plate
4. Position the CPU above the socket,
ensuring that the gold triangle mark
is on the bottom-left corner of the
socket, then fit the CPU notches to
the socket's alignment keys.
The CPU fits in only one
orientation. DO NOT force the
CPU into the socket to prevent
bending the pins on the socket
and damaging the CPU.
Gold
triangle
mark
CPU notches
Alignment
key
Alignment
key
Do not remove the PnP cap yet
from the CPU socket. Doing so
may bend the pins of the socket.
Summary of Contents for TS300-E8-RS4-C
