Asus TS300-E8-RS4-C User Manual Download Page 75

Page: 75 / 170

ASUS TS300-E8-RS4-C

4-19

4. USB connector (10-1 pin USB78; A-Type USB9)

These connectors are for USB 2.0 ports. Connect the USB module cables

to connectors USB78, then install the modules to a slot opening at the

back of the system chassis. These USB connectors comply with USB 2.0

specification that supports up to 480 Mbps connection speed.

5. USB connector (20-1 pin USB3_34)

These connectors are for USB 3.0 ports. These USB connectors comply with

USB 3.0 specification that supports up to 5 Gbps connection speed.

The USB 3.0 ports are backward compatible with USB 2.0 and also supports

fast-charging of supported devices.

Summary of Contents for TS300-E8-RS4-C











































































































































































Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands

Asus TS300-E8-RS4-C, User Manual

Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands