Asus TS300-E8-RS4-C User Manual Download Page 147

Page: 147 / 170

7-9

ASUS TS300-E8-RS4-C

7.3.5

Contact information menu

The Contact menu displays the ASUS contact information, e-mail addresses, and

useful links if you need more information or technical support for your motherboard.

7.3.6

Installing the Intel

Chipset device Software driver

Click

Intel

Chipset Device Software

from the Drivers menu to start the installation.

This section provides the instructions on how to install the Intel

chipset device software on

the system.
You need to manually install the Intel

chipset device software on a Windows

Operating

System.
To install the Intel

chipset device software on Windows

Server 2008 R2:

Restart the computer.

2. Log with

Administrator

privileges.

Insert the Motherboard Support DVD to the optical drive.

The support DVD automatically displays the

Drivers

menu if Autorun is enabled in your

computer.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Summary of Contents for TS300-E8-RS4-C











































































































































































Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands

Asus TS300-E8-RS4-C, User Manual

Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands