Asus TS300-E8-RS4-C User Manual Download Page 162

Page: 162 / 170

7-24

Chapter 7: Driver installation

7.7

Installing the Intel

I210 Gigabit Adapter driver

This section provides the instructions on how to install the

Intel

I210 Gigabit Adapter

driver on the system.
To install the

Intel

I210 Gigabit Adapter

driver on Windows

Server 2008 R2:

Restart the computer.

2. Log on with

Administrator

privileges.

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to

locate the file

ASSETUP.EXE

from the

BIN

folder. Double-click the

ASSETUP.EXE

to run

the support DVD.

Click

Intel® I210 Gigabit Adapter Driver

in the

Drivers

menu of the main screen

to start the installation.

Click

Next

to continue.

Toggle

Modify

then click

Next

in the

Program Maintenance

window.

Summary of Contents for TS300-E8-RS4-C











































































































































































Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands

Asus TS300-E8-RS4-C, User Manual

Search results

Summary of Contents for TS300-E8-RS4-C

Reviews:

Related manuals for TS300-E8-RS4-C

Brands by name

Popular brands