Asus RS300-E8 Series User Manual Download Page 102

Page: 102 / 160

5-32

Chapter 5: BIOS Setup

CSM Parameters

This allows you to set OpROM execution, boot options filter, and other OpROM settings.

Launch CSM [Enabled]

This option allows you to enable or disable the launch of CSM.

Configuration options: [Disabled] [Enabled]

Boot Option filter [Legacy only]

This option allows you to control what devices the system can boot to.

Configuration options: [UEFI and Legacy] [Legacy only] [UEFI only]

Launch PXE OpROM policy [Legacy only]

This option allows you to control the execution of UEFI and Legacy PXE OpROM.

Configuration options: [Do not launch] [UEFI only] [Legacy only]

[Legacy first] [UEFI first]

Launch Storage OpROM policy [Legacy only]

This option allows you to control the execution of UEFI and Legacy Storage OpROM.

Configuration options: [Do not launch] [UEFI only] [Legacy only]

[Legacy first] [UEFI first]

Launch Video OpROM policy [Legacy only]

This option allows you to control the execution of UEFI and Legacy Storage OpROM.

Configuration options: [Do not launch] [UEFI only] [Legacy only]

[Legacy first] [UEFI first]

Other PCI device ROM priority [Legacy OpROM]

This option allows you to control the execution of UEFI and Legacy Storage OpROM.

Configuration options: [UEFI OpROM] [Legacy OpROM]

This option controls if CSM

will be launched.

Launch CSM

[Enabled]

Boot Option filter

[Legacy only]

Launch PXE OpROM policy

[Legacy only]

Launch Storage OpRom policy

[Legacy only]

Launch Video OpRom policy

[Legacy only]

Other PCI device ROM priority

[Legacy OpROM]

Boot

Summary of Contents for RS300-E8 Series

































































































































































Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands

Asus RS300-E8 Series, User Manual

Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands