Asus RS300-E8 Series User Manual Download Page 83

Page: 83 / 160

ASUS RS300-E8 Series

5-13

Enhanced C1 State [Enabled]

This item allows you to enable or disable the Enhanced C1 state.

Configuration options: [Enabled] [Disabled]

CPU C3 Report [Enabled]

Allows you to enable or disable the CPU C3 report to OS.

Configuration options: [Enabled] [Disabled]

CPU C6 Report [Enabled]

Allows you to enable or disable the CPU C6 report to OS.

Configuration options: [Disabled] [Enabled]

CPU C7 Report [CPU C7s]

Allows you to enable or disable the CPU C7 report to OS.

Configuration options: [Disabled] [CPU C7] [CPU C7s]

C1 state auto demotion [Enabled]

Allows you to enable or disable the demotion of the C3/C6/C7 request to C1 based on

uncore auto-demote information.

Configuration options: [Disabled] [Enabled]

C3 state auto demotion [Enabled]

Allows you to enable or disable the demotion of the C6/C7 request to C3 based on

uncore auto-demote information.

Configuration options: [Disabled] [Enabled]

Package C State limit [AUTO]

Allows you to set the Package C State limit to AUTO.

Configuration options: [C0/C1] [C2] [C3] C6] [C7] [C7s] [AUTO]

LakeTiny Feature [Disabled]

Allows you to enable or disable LakeTiny for C state configuration.

Configuration options: [Disabled] [Enabled]

Intel TXT (LT) Suppot [Disabled]

Allows you to enable or disable the Intel TXT (LT) support.

Configuration options: [Disabled] [Enabled]

ACPI T State [Disabled]

Allows you to enable or disable the ACPI T state.

Configuration options: [Disabled] [Enabled]

This following items appears only when you set the

CPU C states

[Enabled]

CPU C states [Enabled]

Allows you to enable or disable the CPU C states.

Configuration options: [Enabled] [Disabled]

Summary of Contents for RS300-E8 Series

































































































































































Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands

Asus RS300-E8 Series, User Manual

Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands