Asus RS300-E8 Series User Manual Download

Page: 74 / 160

5-4

Chapter 5: BIOS Setup

5.1.3

BUPDATER utility

The succeeding BIOS screens are for reference only. The actual BIOS screen displays

may not be the same as shown.

The BUPDATER utility allows you to update the BIOS file in DOS environment using a

bootable USB flash disk drive with the updated BIOS file.

Updating the BIOS file

To update the BIOS file using the BUPDATER utility:
1.

Visit the ASUS website at www.asus.com and download the latest BIOS file for the

motherboard. Save the BIOS file to a bootable USB flash disk drive.

Download the BUPDATER utility (BUPDATER.exe) from the ASUS support website at

www.asus.com/support to the bootable USB flash disk drive you created earlier.

Boot the system in DOS mode, then at the prompt, type:

BUPDATER /i[filename].CAP

where [filename] is the latest or the original BIOS file on the bootable USB flash disk

drive, then press <Enter>.

A:\>BUPDATER /i[file name].CAP

Summary of Contents for RS300-E8 Series

































































































































































Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands

Asus RS300-E8 Series, User Manual

Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands