Asus RS300-E8 Series User Manual Download Page 38

Page: 38 / 160

Chapter 2: Hardware Information

2-18

2.8

Removable/optional components

You may need to remove previously installed system components when installing or removing

system devices. Or you may need to install the optional components into the system. This

section tells how to remove/install the following components:

System fans

ASUS PIKE RAID card (optional)

ASUS ASMB7-iKVM (optional)

SSD cage (optional)

2.8.1

System fans

To uninstall the system fans:

Disconnect the system fan cable from

the fan connector on the motherboard.

Lift the fan, then set aside.

Repeat steps 1 to 2 to uninstall the

other system fans.

To reinstall the system fans:

Insert the fan to the fan cage. The

airflow directional arrow on the fan side

should point towards the system rear

panel.

Connect the system fan cable to the

fan connector on the motherboard.

Ensure that the system is turned off before removing any components.

Summary of Contents for RS300-E8 Series

































































































































































Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands

Asus RS300-E8 Series, User Manual

Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands