Asus RS300-E8 Series User Manual Download Page 30

Page: 30 / 160

Chapter 2: Hardware Information

2-10

2.4

Hard disk drives

The system supports four hot-swap SATAIII/SAS hard disk drives and two SATAII hard disk

drives. The hard disk drive installed on the drive tray connects to the motherboard SATA/SAS

ports via the SATA/SAS backplane.

Take note of the drive tray holes. Each

side has three holes to fit different types

of hard disk drives. Use two screws on

each side to secure the hard disk drive.

Firmly hold the tray lever and pull the

drive tray out of the bay.

spring lock

To install a hot-swap SATA/SAS HDD:

Release a drive tray by pushing the

spring lock to the right, then pulling the

tray lever outward. The drive tray ejects

slightly after you pull out the lever.

Summary of Contents for RS300-E8 Series

































































































































































Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands

Asus RS300-E8 Series, User Manual

Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands