background image

ASUS RS300-E8 Series

5-31

INT19 Trap Response [Immediate]

This item allows you to set the BIOS reaction on INT19 trapping by Option ROM. 

Configuration options: [Immediate] [Postponed]

Boot Device Seeking [Endless PXE]

This allows you to enable the Boot Device Seeking option.

 

Configuration options:
[Endless PXE]   Continuosly seek remote boot image until boot image is found or the 

operation is aborted (<Ctrl>+<Alt>+<Del> is pressed by the user).

[Normal] 

Seek remote boot image once then stop.

Boot Option Priorities

These items specify the boot device priority sequence from the available devices. The 

number of device items that appears on the screen depends on the number of devices 

installed in the system.

 Network Device BBS Priorities / Hard Drive BBS Priorities

This allows you to set the order of the legacy devices in this group.

• 

To select the boot device during system startup, press <F8> when ASUS Logo 

appears.

• 

To access Windows

®

 OS in Safe Mode, do any of the following:

 

- Press <F5> when ASUS Logo appears.

 

- Press <F8> after POST.

Summary of Contents for RS300-E8 Series

































































































































































Reviews: