Asus RS300-E8 Series User Manual Download Page 22

Page: 22 / 160

Chapter 2: Hardware Information

2-2

2.1

Chassis cover

2.1.1

Removing the rear cover

Locate and remove the front side screws.

Front side screw

Firmly hold the cover and slide it

toward the rear panel for about half

an inch until it is disengaged from the

chassis.

Lift the cover from the chassis.

To recover the rear cover, reverse

step 1 to 4.

Loosen the two thumbscrews on the rear panel to release the rear cover from the

chassis.

Thumbscrews

A protection film is pre-attached to

the system cover before shipping.

Please remove the protection film

before turning on the system for

proper heat dissipation.

Summary of Contents for RS300-E8 Series

































































































































































Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands

Asus RS300-E8 Series, User Manual

Search results

Summary of Contents for RS300-E8 Series

Reviews:

Related manuals for RS300-E8 Series

Brands by name

Popular brands