2-6
Chapter 2: RAID configuration
Here is a description of the options listed on the left of the main WebBIOS CU
screen:
•
Adapter Properties:
Select this to view the properties of the currently selected
SAS adapter.
•
Scan Devices:
Select this to have the WebBIOS CU re-scan the physical and
virtual disks for any changes in the drive status or the physical configuration.
The WebBIOS CU displays the results of the scan in the physical and virtual
disk descriptions.
•
Virtual Disks:
Select this to view the Virtual Disks screen, where you can
change and view virtual disk properties, delete virtual disks, initialize disks, and
perform other tasks.
•
Physical Drives:
Select this to view the Physical Drives screen, where you
can view physical drive properties, create hot spares, and perform other tasks.
•
Configuration Wizard:
Select this to start the Configuration Wizard and create
a new storage configuration, clear a configuration, or add a configuration.
•
Adapter Selection:
Select this to view the Adapter Selection screen, where
you can select a different SAS adapter. You can then view information about
the adapter and the devices connected to it, or create a new configuration on
the adapter.
•
Physical View/Logical View:
Select this to toggle between the Physical View
and Logical View screens.
•
Events:
Select this to view system events in the Event Information screen.
•
Exit:
Select this to exit the WebBIOS CU and continue with system boot.
