manualshive.com logo in svg

Asus PIKE 1078, User Manual

The Asus PIKE 1078 is a high-performance storage solution for efficient data management. Enhance your storage capabilities with this versatile device, and get the most out of it by downloading the comprehensive User Manual for free from manualshive.com. Unlock the full potential of your Asus PIKE 1078 with this downloadable manual!

Share
Download
background image

2-30

Chapter 2: RAID configuration

9.  Click 

Accept

 to accept the changes to the virtual disk definition, or click 

Back

 

to return to the previous settings.

10.  Click 

Next

 when you are finished 

defining virtual disks.

 

The configuration preview screen 

appears, as shown in the right 

figure.

11.  Check the information in the 

configuration preview.

12.  If the virtual disk configuration is 

acceptable, click 

Accept

 to save 

the configuration. Otherwise, click 

Cancel

 to end the operation and return to the WebBIOS main menu, or click 

Back

 to return to the previous screens and change the configuration.

13.  If you accept the configuration, click 

Yes

 at the prompt to save the 

configuration.

 

The WebBIOS main menu appears.

Summary of Contents for PIKE 1078

















































































Reviews:

No comments

Related manuals for PIKE 1078

TC-Helicon PERFORM-VK Quick Start Manual preview
PERFORM-VK
Brand: TC-Helicon Pages: 2
Dahua NVR2104-S2 Quick Start Manual preview
NVR2104-S2
Brand: Dahua Pages: 6
Opengear IMG4216-25 Quick Start Manual preview
IMG4216-25
Brand: Opengear Pages: 2
EMCIS LISN User'S Operating Manual preview
LISN
Brand: EMCIS Pages: 14
ICP DAS USA PDS-734D Quick Start Manual preview
PDS-734D
Brand: ICP DAS USA Pages: 8
TVT Digital TD-3316B4-16P-A1 Quick Start Manual preview
TD-3316B4-16P-A1
Brand: TVT Digital Pages: 2
Kontron CP3002-RA User Manual preview
CP3002-RA
Brand: Kontron Pages: 98
Cabletron Systems MMAC-Plus 9G536-04 User Manual preview
MMAC-Plus 9G536-04
Brand: Cabletron Systems Pages: 42
Atmel STK501 Specification Sheet preview
STK501
Brand: Atmel Pages: 2
Intel i960 Jx Developer'S Manual preview
i960 Jx
Brand: Intel Pages: 578
Crown PIP-AF Owner'S Manual preview
PIP-AF
Brand: Crown Pages: 7
Uctronics U6180 Instruction Manual preview
U6180
Brand: Uctronics Pages: 2
IEI Technology WAFER-EHL Series User Manual preview
WAFER-EHL Series
Brand: IEI Technology Pages: 142
RadioSPECTRAL ICOM IC-7300 Installation Manual preview
ICOM IC-7300
Brand: RadioSPECTRAL Pages: 2
ZALMAN VF2000 LED User Manual preview
VF2000 LED
Brand: ZALMAN Pages: 9
Serial Cables PCI4-AD-x16HI-BG4 User Manual preview
PCI4-AD-x16HI-BG4
Brand: Serial Cables Pages: 15
ZALMAN CNPS9700 LED User Manual preview
CNPS9700 LED
Brand: ZALMAN Pages: 8
Apposite Technologies Linktropy MINI-G User Manual preview
Linktropy MINI-G
Brand: Apposite Technologies Pages: 57

Brands by name

Popular brands

Load more brands