Asus PIKE 1078 User Manual Download Page 17

Page: 17 / 80

ASUS PIKE 1078

2-3

If you want to boot the system from a hard disk drive included in a created RAID

set, copy first the RAID driver from the support CD to a floppy disk before you

install an operating system to the selected hard disk drive.

2.1.2

Installing hard disk drives

The RAID card supports SAS for RAID set configuration. For optimal performance,

install identical drives of the same model and capacity when creating a disk array.

To install SAS hard disks for RAID configuration:

1. Install the SAS hard disks into the drive bays following the instructions in the

system user guide.

2. Connect the SAS port connectors to the SAS drives.

RAID 60

is a combination of RAID 0 and RAID 6. It uses distributed parity, with two

independent parity blocks per stripe in each RAID set, and disk striping. A RAID

60 virtual disk can survive the loss of two disks in each of the RAID 6 sets without

losing data. It works best with data that requires high reliability, high request rates,

high data transfers, and medium-to-large capacity.

Summary of Contents for PIKE 1078

















































































Search results

Summary of Contents for PIKE 1078

Reviews:

Related manuals for PIKE 1078

Brands by name

Popular brands

Asus PIKE 1078, User Manual

Search results

Summary of Contents for PIKE 1078

Reviews:

Related manuals for PIKE 1078

Brands by name

Popular brands