ASUS PCI-SIU2 User’s Manual
55
8. Microsoft Windows NT Driver Installation
•
Select SCSI ADAPTERS from within the CONTROL PANEL
group,
•
Select PCI SCSI Host Adapter from within the SCSI CONTROL-
LERS listing. If “This device is working properly” is displayed
on your screen, the driver has been correctly installed.
Installing a new Win NT & ASUS driver without disks
For computer systems installing or upgrading to Windows NT from a floppyless
setup such as a share on your network, these instructions will guide you through
the PCI-SIU2 host adapter driver installation. The Windows NT drivers are
located on the PCI-SIU2 DRIVER DISK. It is important that the hardware
has been installed successfully before proceeding further.
1
Execute a floppyless setup as described by the Windows NT System
Administrator’s Guide
2
When SETUP begins to load, the screen will turn from black to blue
with the text “SETUP IS INSPECTING YOUR COMPUTER’S
HARDWARE CONFIGURATION…” at the top
•
Press the F6 key to interrupt this process. You will have two sec-
onds in which to press this key
•
Follow the instructions on the screen until you are asked to specify
a SCSI driver.
3
Insert the PCI-SIU2 DRIVER DISK 1 into your local floppy disk
drive, and press <ENTER>.
•
Select: PCI SCSI Host Adapter
4
The ASUS host adapter driver is now installed
The on-screen instructions will continue for a complete installation of Win-
dows NT. Refer to your Windows NT System Administrator’s Guide for comple-
tion of the operating system installation procedure.
Installing a new Win NT system from a Bootable CD
