ASUS PCI-SIU2 User’s Manual
43
Existing Windows 95B (OSR2) System
These instructions will guide you through the installation of the ASUS host
adapter to an existing Windows 95 system. Windows 95 will automatically
detect the presence of new hardware in Plug and Play compliant systems. It is
important that the ASUS PCI-SIU2 hardware has been properly installed be-
fore proceeding further.
1
Microsoft Windows 95 will detect the presence of new hardware upon
boot-up and will display a dialog window titled “update Device driver
wizard”
2
Insert the PCI-SIU2 Driver Disk 1 into floppy drive,:
•
Select “NEXT”
•
Select the “OTHER LOCATION”
•
Type A:\Win95, then select “OK”
•
Select “FINISH”
•
At window “Insert Disk labled PCI-SIU2 Driver Disk 1”, select
“OK”
•
At window titled “Copying file”, replace the highlighted direc-
tory path with A:\Win95, then select “OK” this will complete load-
ing the INIA100.MPD driver onto your hard disk drive. Restart
your computer. This step may need to be done more than once.
3
It is highly recommended that you verify the ASUS PCI-SIU2 Win-
dows 95 device driver by selecting MY COMPUTER from the desk-
top. Then select CONTROL PANEL:
•
Select SYSTEM from within the CONTROL PANEL group,
•
Select DEVICE MANAGER from within the SYSTEM group,
•
Select SCSI CONTROLLERS from within the DEVICE MAN-
AGER listing, and
•
Select the PCI SCSI Host Adapter entries from within the SCSI
CONTROLLER listing. If “This device is working properly” is
displayed on your screen, the driver has been correctly installed.
6. MS Win 95/95b (OSR2) Driver Installation
