ASUS PCI-SIU2 User’s Manual
41
6. MS Win 95/95b (OSR2) Driver Installation
It is highly recommended that you verify the ASUS PCI-SIU2 Windows 95
device driver by selecting MY COMPUTER from the desktop. Then select
CONTROL PANEL:
•
Select SYSTEM from within the CONTROL PANEL group,
•
Select DEVICE MANAGER from within the SYSTEM group,
•
Select SCSI CONTROLLERS from within the DEVICE MANAGER
listing, and
•
Select the PCI SCSI Host Adapter from within the SCSI CONTROL-
LER listing. If “This device is working properly” is displayed on your
screen, the driver has been correctly installed.
New Windows 95B (OSR2) Installation
These instructions will guide you through the installation of the ASUS host
adapter driver while installing Windows 95B (OSR2). Windows 95B will be
installed from either a CD-ROM or floppy diskettes. It is important that the
hardware and DOS 4.01 or higher have been installed successfully before pro-
ceeding further. If installing from a SCSI CD-ROM drive, it is important that
the ASUS ASPI driver, and CD-ROM driver be installed before proceeding
further.
1
Access the Windows 95B CD-ROM from the DOS prompt. Since OSR2
is never an upgrade version, you must do a new install from a DOS
prompt. Execute the SETUP.EXE program and follow the instruc-
tions on your screen. If you are installing from floppy diskette, insert
the Windows 95 Setup Disk 1 in your floppy disk drive and boot your
system. Follow the instructions on your screen.
2
Once a Windows 95 session is established, use your installed mouse or
the appropriate key strokes to select MY COMPUTER from the MAIN
DESKTOP. Execute the following steps:
•
Select CONTROL PANEL from within the MY COMPUTER group
•
Select SYSTEM from within the CONTROL PANEL group,
•
Select DEVICE MANAGER tab from within the SYSTEM group
•
Select the OTHER DEVICES category from within the DEVICE
MANAGER listing
•
Select one of the PCI-SCSI Bus Controller sub-category from within
the OTHER DEVICES listing
