36
ASUS PCI-SIU2 User’s Manual
New Windows 95/95a Installation
These instructions will guide you through the installation of the ASUS host
adapter driver while installing Windows 95. Windows 95 will be installed
from either a CD-ROM or floppy diskettes. It is important that the hardware
and DOS 4.01 or higher have been installed successfully before proceeding
further. If installing from a SCSI CD-ROM drive, it is important that the ASUS
ASPI driver, and CD-ROM driver be installed before proceeding further.
1
Access the Windows 95 CD-ROM from either the DOS prompt or from
Microsoft Windows 3.x File Manager. Execute the SETUP.EXE pro-
gram and follow the instructions on your screen. If you are installing
from floppy diskette, insert the Windows 95 Setup Disk 1 in your floppy
disk drive and boot your system. Follow the instructions on your screen.
2
Once a Windows 95 session is established, use your installed mouse or
the appropriate key strokes to select MY COMPUTER from the MAIN
DESKTOP. Execute the following steps:
•
Select CONTROL PANEL from within the MY COMPUTER
icon.
•
Select SYSTEM from within the CONTROL PANEL group
•
Select DEVICE MANAGER tab from within the SYSTEM group
•
Select the OTHER DEVICES category from within the DEVICE
MANAGER listing.
•
Select the PCI-SCSI Bus Controller sub-category from within
the OTHER DEVICES listing.
•
In the PCI-SCSI Bus Controller Properties window, select the
DRIVER tab, then select “CHANGE DRIVER...”.
•
In the SELECT HARDWARE TYPE window, select SCSI CON-
TROLLERS.
•
In the SELECT DEVICE window, select “HAVE DISK...”.
6. MS Win 95/95b (OSR2) Driver Installation
