ASUS PCI-SIU2 User’s Manual
35
6
Overview
PCI-SIU2 will support Microsoft Windows 95 and Windows 95B (OSR2) with
the addition of a software driver. The installation procedure described here
requires some experience in Windows 95 system setup and administration.
The device driver is transferred from the PCI-SIU2 Driver Disk 1 to the hard
drive where it is automatically initialized during the system boot routine.
The following files are used for installation and will be found on the PCI-
SIU2 Driver Disk 1 in the A:\win95 directory:
\WIN95\INIA100.MPD
PCI-SIU2 SCSI Host Adapter Windows 95 miniport driver.
\WIN95\INIA100.INF
Windows 95 installation information file.
Installation
The PCI-SIU2 driver developed for Windows 95 is loaded during the system
boot routine and will remain resident on the drive. This is accomplished by
following one of the three installation procedures listed:
•
New Windows 95 and Windows 95B (OSR2) installation.
•
Adding the ASUS Windows 95 device driver to an existing Windows
95 or Windows 95B (OSR2) system.
•
Updating INIA100.MPD device driver
The procedures described to make changes to the system have distinct differ-
ences. It is strongly suggested that the selected procedure be read and under-
stood before proceeding with the system configuration changes. Please read
the instructions carefully.
To determine which version of Windows 95 you have installed on your sys-
tem, check the date of the KRNL32.DLL file located in your Windows direc-
tory. A file date of 07/11/95 belongs to Windows 95, first release; 12/31/95
belongs to Windows 95a or 95 with Service Pack 1; 08/24/96 reflects Win-
dows 95b or OSR2.
6. MS Win 95/95b (OSR2) Driver Installation