48
ASUS PCI-SIU2 User’s Manual
Adding PCI-SIU2 Driver to Existing Win 98
These instructions will guide you through the installation of the ASUS host
adapter to an existing Windows 98 system. Windows 98 will automatically
detect the presence of new hardware in Plug and Play compliant systems. It is
important that the ASUS hardware has been properly installed before proceed-
ing further.
1
Microsoft Windows 98 will detect the presence of new hardware upon
boot-up and will display a dialog window titled NEW HARDWARE
FOUND and PCI SCSI BUS CONTROLLERS will be highlighted.
•
Select: DRIVER FROM DISK PROVIDED BY HARDWARE
MANUFACTURER, then “OK”
•
Select SCSI CONTROLLER from the list of available devices,
then select “HAVE DISK...”
2
In the INSTALL FROM DISK window that is displayed, enter the ASUS
Driver path name:
Insert PCI-SIU2 DRIVER DISK 1 into drive A:
Type: A:\WIN95, select “OK”
3
Select PCI SCSI Controller, select “OK”, then “OK” again to install
the INIA100.INF driver onto your hard disk drive. It may be necessary
to direct Windows to look for the driver in A:\win95 before the driver
can be copied. This step may need to be repeated more than once.
4
This completes loading the Host Adapter Driver. You must now reboot
your system to activate the SCSI device driver.
5
It is highly recommended that you verify Initio’s Windows 98 device
driver by selecting MY COMPUTER from the desktop. Then select
CONTROL PANEL:
•
Select SYSTEM from within the CONTROL PANEL group,
•
Select Device Manager from within the SYSTEM group,
•
Select SCSI Controllers from within the Device Manager listing,
•
Select the PCI SCSI Controller from within the SCSI Controller
listing. If “This device is working properly” is displayed under
Device Status, the driver has been correctly installed.
7. Microsoft Windows 98 Driver Installation
