Asus P5B-PLUS User Manual Download Page 97

Page: 97 / 172

ASUS P5B-Plus Series

4-27

4.5

Power menu

The Power menu items allow you to change the settings for the Advanced

Power Management (APM). Select an item then press <Enter> to display the

configuration options.

4.5.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state

to be used for system suspend.

Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

4.5.2

Repost Video on S3 Resume [Disabled]

Determines whether to invoke VGA BIOS POST on S3/STR resume.

Configuration options: [Disabled] [Enabled]

4.5.3

ACPI 2.0 Support [Disabled]

Specifies the Advanced Configuration and Power Interface (ACPI) version

supported. Configuration options: [Disabled] [Enabled]

4.5.4

ACPI APIC support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface

(ACPI) support in the Advanced Programmable Interrupt Controller (APIC). When

set to [Enabled], the ACPI APIC table pointer is included in the RSDT pointer list.

Configuration options: [Disabled] [Enabled]

Select Screen

Select Item

Change Option

F1 General Help

F10 Save and Exit

ESC Exit

BIOS SETUP UTILITY

Main Advanced

Power

Boot Tools Exit

Suspend Mode

[Auto]

Repost Video on S3 Resume

[Disabled]

ACPI 2.0 Support

[Disabled]

ACPI APIC support

[Enabled]

APM Configuration

Hardware Monitor

Select the ACPI state

used for System

Suspend.

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands