Asus P5B-PLUS User Manual Download Page 162

Page: 162 / 172

5-52

Chapter 5: Software support

Resetting disks to non-RAID

To reset disks to non-RAID:
1. In the main JMB363 RAID BIOS menu, highlight Revert HDD to non-RAID

using the up/down arrow key then press <Enter>.

2. Use the space bar to select the HDD that you want to reset to non-RAID.

A selected HDD shows a sign before it.

3. A dialogue box appears to confirm the action. Press <Y> to confirm;

otherwise, press <N>.

[Main Menu]

Create RAID Disk Drive

Delete RAID Disk Drive

Revert HDD to Non-RAID

Solve Mirror Conflict

Rebuild Mirror Drive

Save and Exit Setup

Exit Without Saving

Pressing <Y> deletes all the data in the HDD.

An HDD that has been previously configured as part of another RAID set in

another platform is called a broken RAID HDD. When you install a broken RAID

HDD, you cannot select this HDD when configuring a RAID set through the

JMB363 utility.

If you still want to use this broken RAID HDD as part of the RAID set configured

through the JMB363, you may do so by resetting the disk to non-RAID. You will,

however, lose all data and previous RAID configurations.

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands