Asus P5B-PLUS User Manual Download Page 152

Page: 152 / 172

5-42

Chapter 5: Software support

6. Use the up/down arrow key to select the stripe size for the RAID 0 array, then

press <Enter>. The available stripe size values range from 4 KB to 128 KB.

The default stripe size is 128 KB.

TIP: We recommend a lower stripe size for server systems, and a higher stripe

size for multimedia computer systems used mainly for audio and video editing.

7. Key in the RAID volume capacity that you want, then press <Enter>. The

default value indicates the maximum allowed capacity.

8. Press <Enter> when the Create Volume item is highlighted. This warning

message appears.

WARNING: ALL DATA ON SELECTED DISKS WILL BE LOST.

Are you sure you want to create this volume? (Y/N):

9. Press <Y> to create the RAID volume and return to the main menu, or <N> to

go back to the Create Volume menu.

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands