manualshive.com logo in svg

Asus P5B-PLUS, User Manual, Page: 89 / 172

Share
Download
Asus P5B-PLUS User Manual Download Page 89

ASUS P5B-Plus Series

4-19

4.4.2 

USB Configuration

The items in this menu allows you to change the USB-related features. Select an 

item then press <Enter> to display the configuration options.

The 

Module Versio

n and 

USB Devices Enabled

 items show the auto-detected 

values. If no USB device is detected, the item shows None.

USB Functions [Enabled]

Allows you to enable or disable the USB functions. 

Configuration options: [Disabled] [Enabled]

ASAP (ASUS Accelerated Propeller) will function only when the 

USB Functions

 

item is set to [Enabled].

ASAP [Disabled]

Allows you to enable or disable the ASAP function. 

Configuration options: [Disabled] [Enabled]

Legacy USB Support [Auto]

Allows you to enable or disable support for legacy USB devices. Setting to [Auto] 

allows the system to detect the presence of USB devices at startup. If detected, 

the USB controller legacy mode is enabled. If no USB device is detected, the 

legacy USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]

Port 64/60 Emulation [Disabled]

Allows you to enable or disable the I/O port 60h/64h emulation support. This item 

should be enabled for the complete USB keyboard legacy support for non-USB 

aware OSes. Configuration options: [Disabled] [Enabled]

USB 2.0 Controller Mode [HiSpeed]

Allows you to set the USB 2.0 controller mode to HiSpeed (480 Mbps) or 

FullSpeed (12 Mbps). Configuration options: [FullSpeed ] [HiSpeed ] 

   Select Screen

    Select Item

+-

   Change Option

F1    General Help

F10   Save and Exit

ESC   Exit

v02.58 (C)Copyright 1985-2006, American Megatrends, Inc.

BIOS SETUP UTILITY

 

Advanced

 

USB Configuration

Module Version - 2.24.0-11.4

USB Devices Enabled: 

 

         

None

USB Functions 

 

 

[Enabled]

ASAP 

 

 

[Disabled]

Legacy USB Support  

 

 

[Auto]

Port 64/60 Emulation 

 

 

[Disabled]

USB 2.0 Controller Mode   

 

[HiSpeed]

BIOS EHCI Hand-off 

 

 

[Enabled]

Options

Disabled

Enabled

Summary of Contents for P5B-PLUS













































































































































































Reviews:

No comments