Asus P5B-PLUS User Manual Download Page 71

Page: 71 / 172

ASUS P5B-Plus Series

4-1

4.1

Managing and updating your BIOS

The following utilities allow you to manage and update the motherboard Basic

Input/Output System (BIOS) setup.

ASUS Update

(Updates the BIOS in Windows

environment.)

ASUS EZ Flash 2

(Updates the BIOS using a floppy disk or USB flash disk.)

ASUS AFUDOS

(Updates the BIOS using a bootable floppy disk)

ASUS CrashFree BIOS 3

(Recovers the BIOS using a bootable floppy disk,

USB flash disk or the motherboard support CD when the BIOS file fails or

gets corrupted.)

Refer to the corresponding sections for details on these utilities.

Save a copy of the original motherboard BIOS file to a bootable floppy disk or

USB flash disk in case you need to restore the BIOS in the future. Copy the

original motherboard BIOS using the ASUS Update or AFUDOS utilities.

Installing ASUS Update

To install ASUS Update:

1.  Place the support CD in the optical drive. The Drivers menu appears.
2.  Click the Utilities tab, then click Install ASUS Update VX.XX.XX.
3.  The ASUS Update utility is copied to your system.

4.1.1

ASUS Update utility

The ASUS Update is a utility that allows you to manage, save, and update the

motherboard BIOS in Windows

environment. The ASUS Update utility allows you

to:

•

Save the current BIOS file

•

Download the latest BIOS file from the Internet

•

Update the BIOS from an updated BIOS file

•

Update the BIOS directly from the Internet, and

•

View the BIOS version information.

This utility is available in the support CD that comes with the motherboard

package.

ASUS Update requires an Internet connection either through a network or an

Internet Service Provider (ISP).

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands