Asus P5B-PLUS User Manual Download Page 112

Page: 112 / 172

5-2

Chapter 5: Software support

5.2.2

Drivers menu

The Drivers menu shows the available device drivers if the system detects installed

devices. Install the necessary drivers to activate the devices.

ASUS InstAll-Drivers Installation Wizard

Installs all of the drivers through the Installation Wizard.

Intel Chipset Inf Update Program

Installs the Intel

chipset Inf update program.

ASUS AI Remote

Installs ASUS AI Remote utility.

SoundMAX ADI1988 Audio Driver

Installs the SoundMAX

ADI1988 audio driver and application.

Attansic L1 Gigabit Ethernet Driver

Installs the Attansic L1 Gigabit Ethernet driver.

JMicron JMB36X RAID Controller Driver

Installs the JMicron

JMB36X Serial ATA RAID controller driver.

USB 2.0 Driver

Installs the USB 2.0 driver.

Summary of Contents for P5B-PLUS













































































































































































Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands

Asus P5B-PLUS, User Manual

Search results

Summary of Contents for P5B-PLUS

Reviews:

Related manuals for P5B-PLUS

Brands by name

Popular brands